CD74HCT125M96G4 Overview
There is a neat SOIC package used in buffer. A Tape and Reel external packaging is used for this buffer. A total of 4 elements are used. 14 terminations with different functions are available on this transceiver. An input voltage of 5V is required. HCT family part. With the electrical part, 14 pins are set. Surface Mount applications are suitable for it. There are 14 pins on digital buffer. The bus transceiver has 2 ports. For each element, there are 1 bits. In particular, automotive buffer is a type of Bus Driver/Transceivers. When the electronic component is quiescent, it uses 8μA. Power supplies with a 5V volt rating are recommended. Users should apply 5V supply voltage to the lectronic component to run it safely and stably. For better service, buffer includes DUMMY VAL. As low as -55°C can be tolerated by it. You shouldn't let the amibient temperature get higher than 125°C when using this buffer. It outputs 6mA when it is in low-level mode, which is the default. There is a possibility of the electronic component conducting -6mA of current when it is in high-level output mode. It is recommended that the voltage used to run this electrical component is at least 4.5V. It is rated for a maximum supply voltage of 5.5V. ICs that use BUS DRIVER logic are known as BUS DRIVER logic transceivers. ENABLE LOW control technology allows the logical driver to start up.
CD74HCT125M96G4 Features
Bus Driver/Transceivers
DUMMY VAL
High Level Output: 6mA
Low Level Output: -6mA
BUS DRIVER Logic IC
CD74HCT125M96G4 Applications
There are a lot of Texas Instruments
CD74HCT125M96G4 Buffers & Transceivers applications.
- Wireless modems
- Remote controls
- Wireless network systems
- Satellite communications networks
- Ethernet circuitry
- Wired telephone
- Cordless telephone
- Desktop PC
- Notebook
- Pocket PC
