Name: CD74HC4351M96
Brand: Texas Instruments
SKU: CD74HC4351M96
Price: 0.51000 USD
Availability: InStock

new-10%

CD74HC4351M96

Manufacturer part number:CD74HC4351M96

Manufacturer:Texas Instruments

Description:55ns, 50ns 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4351 20 Pins 400nA 4.5V 20-SOIC (0.295, 7.50mm Width)

Case Package:SOT-23

Datasheet:CD74HC4351M96 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	20-SOIC (0.295, 7.50mm Width)
Number of Pins	20
Weight	500.709277mg
Operating Temperature	-55°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
ECCN Code	EAR99
Resistance	130Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	4.5V
Base Part Number	74HC4351
Pin Count	20
Number of Channels	1
Number of Circuits	1
Max Supply Voltage	6V
Min Supply Voltage	2V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Nominal Supply Current	16μA
Propagation Delay	35 ns
Turn On Delay Time	300 ns
Input Voltage (Min)	2V
Logic Function	Demultiplexer, Multiplexer
Input Voltage (Max)	6V
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	2V~6V ±1V~5V
Supply Type	Dual, Single
Bandwidth	180MHz
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	275 ns
Max Dual Supply Voltage	5V
-3db Bandwidth	145MHz
On-State Resistance (Max)	130Ohm
Min Dual Supply Voltage	1V
High Level Output Current	20mA
Dual Supply Voltage	3V
Low Level Output Current	20mA
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	73 dB
Current - Leakage (IS(off)) (Max)	400nA
Channel Capacitance (CS(off), CD(off))	5pF 25pF
On-state Resistance Match-Nom	10Ohm
Switch Time (Ton, Toff) (Max)	55ns, 50ns
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	450ns
Switch-off Time-Max	375ns
Normal Position	NC
Signal Current-Max	0.025A
Height	2.65mm
Length	12.8mm
Width	7.5mm
Thickness	2.35mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CD74HC4351M96 Product Details

CD74HC4351M96 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 20-SOIC (0.295, 7.50mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. There is 8:1 ratio between the number of multiplexers and demultiplexers. Increasing operating temperature to around -55°C~125°C TA. In total, 20 terminations have occurred. The electronic part delivers high-quality output through its 1 channels. When the electronic component is given a voltage of 4.5V, it should be turned on and run. Electronic part bodies are injected with 20 pins. This multiplexer is composed of 1 circuits. Use 74HC4351 to search for variants of the digital switches. As far as internal resistance is concerned, it has 130Ohm. For functions related to 20 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. normally, users should not supply switches with voltages higher than 6V. Analogue multiplexers of the Dual, Single supply type that are cost-effective. There should be 2V voltage fed to the electrical part below 2V. There is no problem with using dual supply voltage, but it should not exceed 5V. When using dual power supplies, you should attach at least 1V. This product is integrated with an analog integrated circuit (IC) of type SINGLE-ENDED MULTIPLEXER. The electrical component supports 8 inputs. A 180MHz-bandwidth can be used for data transfer.