Name: CD74HC4316PWR
Brand: Texas Instruments
SKU: CD74HC4316PWR
Price: 0.65000 USD
Availability: InStock

new-10%

CD74HC4316PWR

Manufacturer part number:CD74HC4316PWR

Manufacturer:Texas Instruments

Description:37ns, 37ns SPST - NO 170Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4316 16 Pins 100nA 4.5V 16-TSSOP (0.173, 4.40mm Width)

Case Package:SOT-23

Datasheet:CD74HC4316PWR Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Lifecycle Status	ACTIVE (Last Updated: 6 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	61.887009mg
Operating Temperature	-55°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	170Ohm
Additional Feature	ALSO OPERATES WITH 2V TO 10V (VCC-VEE) SUPPLY
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	4.5V
Base Part Number	74HC4316
Pin Count	16
Polarity	Non-Inverting
Number of Channels	4
Max Supply Voltage	6V
Min Supply Voltage	2V
Max Supply Current	16μA
Throw Configuration	SPST
Turn On Delay Time	205 ns
Input Voltage (Max)	6V
Voltage - Supply, Single/Dual (±)	2V~6V ±1V~5V
Supply Type	Dual, Single
Bandwidth	200MHz
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	205 ns
Max Dual Supply Voltage	5V
On-State Resistance (Max)	170Ohm
Min Dual Supply Voltage	1V
High Level Output Current	25mA
Dual Supply Voltage	3V
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	62 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	5pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	37ns, 37ns
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Normal Position	NO
Signal Current-Max	0.025A
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CD74HC4316PWR Product Details

CD74HC4316PWR Overview

Shipping overseas is convenient due to the electrical component's packing in 16-TSSOP (0.173, 4.40mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Operation at a temperature around -55°C~125°C TA. 16 terminations have been made so far. The electronic part delivers high-quality output through its 4 channels. If the voltage supply is 4.5V volts, the electrical component should be turned on and run. A total of 16 pins are injected into the electrical part body. Multiplexers built on a SPST - NO switching circuit are built. Try searching for the analog switch ic with 74HC4316 if you are looking for variants. In this multiplexer, the internal resistance is 170Ohm. Datasheets for functions of 16 pins are available. There is Multiplexer or Switches analog multiplexer like this in the world. An abnormal situation would be for the switch device to be supplied with a voltage greater than 6V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. 2V is the lowest voltage that should be fed to the electronic electronic part. If put voltage greater than 16μA on the device, damage may be caused to the analogue multiplexer. For this switch, a dual supply voltage is feasible, but it must not exceed 5VIt is recommended that you attach at least 1V to your dual power supply. In 200MHz-bandwidths, data can be transferred. You shouldn't miss the additional features of the electrical component, such as: ALSO OPERATES WITH 2V TO 10V (VCC-VEE) SUPPLY.