CD74HC4052MTG4 Overview
This electronic part is conveniently packaged in SOIC, making it easy to ship abroad. In total, there have been 16 terminations. A 8 channel electronic part produces high-quality output. A 4.5V voltage supply should turn on and run the electronic component. An injection of 16 pins is performed into the body of the electrical component. Analog switches have 130Ohm internal resistance. To find out what the 16 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users should never supply a voltage higher than 6V to a switch device. Analog switch ics with Dual, Single supply type are cost-effective. There should be 2V voltage fed to the electrical part below 2V. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 5V. The voltage should be at least 1V if you are using dual power supplies. This product is integrated with an analog integrated circuit (IC) of type DIFFERENTIAL MULTIPLEXER. In 185MHz-bandwidths, data can be transferred. This electronic part has additional features, such as: ALSO OPERATES WITH 2V TO 10V (VCC-VEE) SUPPLY. Temperatures higher than 125°C are not recommended for operation of the analogue multiplexer. It can conduct 4-bit signals.
CD74HC4052MTG4 Features
8 Channels
Bandwidth: 185MHz
Additional Features: ALSO OPERATES WITH 2V TO 10V (VCC-VEE) SUPPLY
4-Bit
CD74HC4052MTG4 Applications
There are a lot of Texas Instruments
CD74HC4052MTG4 Analog Switches & Multiplexers ICs applications.
- Ultrasound
- Audio and video switching
- Automatic test equipment
- Precision data acquisition
- Battery-powered systems
- Sample-and-hold systems
- Communication systems
- Data Acquisition Systems
- Relay Replacement
- Battery Powered Systems
