CD74HC244EE4 Overview
This package uses PDIP. It is necessary to use all 2 elements. Thebuffer features 20 terminations that serve different purposes. 4.5V is the required supply voltageThis buffer driver is part of the HC/UH family of parts. With the electrical component, 20 pins are set. This logical driver is suitable for Through Hole different applications. In total, it has 20 pins. The transceiver features 2 ports for enhanced functionality. Each element uses 4 bits. During quiescent state, the electronic part uses 8μA. TUBE packages are usually sold. With TWO ACTIVE-LOW OUTPUT ENABLES, you can better serve your customers. A temperature as low as -55°C can be tolerated by this buffer. There should be no more than 125°C ambient temperature for the logical driver to operate. As a low-level output mode, it produces 7.8mA. During high-level output, the electronic part may conduct -7.8mA. At least 2V should be used in order to run this automotive buffer on a continuous basis. Approximately 6V are the maximum supply voltages. There is an bus transceiver called a BUS DRIVER logic chip. This is sufficient to produce 8 outputs from it. Buffer ICs are controlled by ENABLE LOW control technology during startup.
CD74HC244EE4 Features
TWO ACTIVE-LOW OUTPUT ENABLES
High Level Output: 7.8mA
Low Level Output: -7.8mA
BUS DRIVER Logic IC
CD74HC244EE4 Applications
There are a lot of Texas Instruments
CD74HC244EE4 Buffers & Transceivers applications.
- Cordless telephone
- Desktop PC
- Notebook
- Pocket PC
- Desktop radio
- Clock radio
- Tuner
- Portable radio
- Car radio
- Satellite radio receiver
