CD74HC194EE4 Overview
PDIP is a package containing the embedded device. Taking the total number of terminations on the chip and adding them up, we get 16. A Rail/Tube case is used to pack it. The part operates at 4.5V voltage. A total of 1 elements can be found on this part. It is equipped with a pin count of 16. It is recommended that the mount should be done by Through Hole. There is an electronic component in the HC/UH. It is noted that this chip uses an operating supply voltage of 5V. The following additional aspects of this section are worth noting: HOLD MODE. In the device, there are 6 input lines that are available for use. It has a total of zero pins. At temperatures below 125°C, it is recommended for use. Ideally, it should not fall below -55°C. A voltage of 6V is employed as the supply voltage. There is a voltage applied to the supply that is greater than 2V.
CD74HC194EE4 Features
With 16 pins
Operate supply voltage at 5V
CD74HC194EE4 Applications
There are a lot of Texas Instruments
CD74HC194EE4 Shift Registers applications.
- Data Processors
- Pseudo Random Pattern Generator
- Pulse Extenders
- Pattern Recognizers
- Interconnectors
- Counter
- Data manipulation
- Delay Line
- Generate time delay toward digital circuits
- Parallel data
