CD74HC173MG4 Overview
It is embeded in 16-SOIC (0.154, 3.90mm Width) case. Package Tubeembeds it. T flip flop uses Tri-State, Non-Invertedas the output. It is configured with the trigger Positive Edge. Surface Mountis occupied by this electronic component. With a supply voltage of 2V~6V volts, it operates. -55°C~125°C TAis the operating temperature. This D latch has the type D-Type. In this case, it is a type of FPGA belonging to the 74HC series. You should not exceed 60MHzin the output frequency of the device. The element count is 1 . Currently, there are 16 terminations. The object belongs to the 74HC173 family. It is powered from a supply voltage of 4.5V. There is 10pF input capacitance for this T flip flop. An electronic device belonging to the family HC/UHcan be found here. Electronic part Surface Mountis mounted in the way. The 16pins are designed into the board. A Positive Edgeclock edge trigger is used in this device. There is a FF/Latchesbase part number assigned to the RS flip flops. There are 4bits in its design. As soon as 6Vis reached, Vsup reaches its maximum value. A normal operating voltage (Vsup) should remain above 2V. The system runs on a power supply of 5V watts. With an output current of 7.8mA, this device offers maximum design flexibility. It has 4lines. In terms of quiescent current, it consumes 8μA . Additionally, you may refer to the additional WITH DUAL OUTPUT ENABLE of the electronic flip flop.
CD74HC173MG4 Features
Tube package
74HC series
16 pins
4 Bits
5V power supplies
CD74HC173MG4 Applications
There are a lot of Texas Instruments CD74HC173MG4 Flip Flops applications.
- Data storage
- Latch
- Power down protection
- Circuit Design
- Communications
- Computers
- Memory
- Data Synchronizers
- Control circuits
- Guaranteed simultaneous switching noise level
