CD74ACT299M Overview
20-SOIC (0.295, 7.50mm Width) is the package in which the device is embedded. This chip has a total termination count of 20. It is packed in a case number Tube. Voltage rating of the part is 5V. On this part, there are 1 elements. It is equipped with a pin count of 20. It is recommended that the mount should be done by Surface Mount. It is a component of the ACT. In Surface Mount, this component is mounted. The operating temperature ranges -55°C~125°C. Votage is supplied within 4.5V~5.5V. In this case, the electrical component belongs to the series 74ACT. By using the 74ACT299 family, you can find similar parts. This chip's operating supply voltage is reported as 5V. There are also the following additional considerations in this section: HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL. This device has 10 input lines available. A device capable of delivering voltage at 5V can be used. As a result, it runs at a quiescent current of 8μA. Its frequency is set to 90MHz.
CD74ACT299M Features
With 20 pins
Mounted in Surface Mount type.
Based on 74ACT299 family
Operate supply voltage at 5V
It supplies 5V power
Quiescent Current at 8μA
CD74ACT299M Applications
There are a lot of Texas Instruments CD74ACT299M Shift Registers applications.
- Remote control holding register
- ROM Chips
- Sequence generator
- data manipulation
- Serial-to-parallel data conversion
- Flash Memory
- Output expansion
- temporary data storage
- Pattern Recognizers
- Data Processors
