CD74AC283EE4 Overview
In the PDIPpackage, it is supplied. In order to configure it, it uses 16terminations. As a result of the supply voltage of 0, 3Vcan operate in a fully flexible manner. The total number of component pins is 16. Packaging is based on Rail/Tube. To connect the circuit's other components, there are 16pins. Using [0], it can be mounted. In this case, it appears as a member of the family [0]. In this device, there is information of 4bits. It is possible for the result to be yesin Pbfree code. It is important to note that in regards to this electronic device, FULL ADDER; WITH INTERNAL CARRY LOOKAHEADis an extremely significant feature. The device is manufactured at a temperature grade of MILITARY. From the voltage source, there is 3.3/5Vvoltage. Electrical characteristics are stable at temperature 125°Cfor extended periods of time. It operates within a specified temperature range, with the lower limit typically set at -55°C degrees Celsius. In this case, the maximum voltage available to the device is 5.5V. A minimum voltage of 1.5Vis available for the device. In the quiescent state, it consumes 8μA current. This device uses a logic IC type of [0]. In the case of a specified high-level voltage, there is -24mA current flowing into the output. The output terminal has 24mA current flowing into it when the voltage is set to a low level. In this case, 1channels are used to configure its basis.
CD74AC283EE4 Features
Embedded in the PDIP package
FULL ADDER; WITH INTERNAL CARRY LOOKAHEAD
ADDER/SUBTRACTOR as logic IC type
CD74AC283EE4 Applications
There are a lot of Texas Instruments
CD74AC283EE4 Counters & Dividers applications.
- Digital multiplexing and demultiplexing
- Signal gating
- Frequency dividing circuits
- Time delay circuits
- Communications Digital Frequency Synthesizers;
- VHF, UHF, FM, AM, etc.
- Fixed or Programmable Frequency Division
- Time Out Timer for Consumer-Application Industrial Controls
- Timing applications
- Clocks
