CD74AC157M Overview
In order to conserve board space, digital switch is included in the 16-SOIC (0.154, 3.90mm Width).As a result, it is packaged in the way of Tube.The mounting method digital switch ic uses is Surface Mount.Multiplexer is the analog IC that the multiplexers uses.In the case of -55°C~125°C, turn signal switch will not be affected by external factors.The turn signal switch is designed for use with a 1.5V~5.5V supply voltage, which gives it a lot of flexibility.With the 74AC series, the multiplexers are suitable for a diverse range of applications.There are 16 terminations included in its basic configuration.To find signal switch's related components, a base part number of 74AC157 may also be used.The multiplexer's system is supplied with a voltage of 3.3V.Currently, this turn signal switch has a total of 16 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.This supply type employs Single.This multiplexer ic has 16 pins configured.The mounting point is Surface Mount.I would like to refer to the logic switch as a member of the AC family.There are 2 bits signal multiplexer provides.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.There is a power supply provided for the mux switch's normal operation of 3.3/5V.As part of the operation of this turn signal switch, there are 1 outputs.In this multiplexer, there is a total of 8 inputs.
CD74AC157M Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 3.3/5V
CD74AC157M Applications
There are a lot of Texas Instruments CD74AC157M Signal Switches / Multiplexers / Decoders applications.
- To select different devices in microprocessor output
- To select different task for memory in microprocessor memory systems
- Relay
- Decimal decoder
- Microprocessor instruction decoding
- Make half adder
- Image transmission
- Used to connect a single source to multiple destinations
- To select different devices in microprocessor input
- Data bus control
