CD4541BEE4 Overview
It is enclosed in the PDIP packaging along with the digital timer. Ensure that the programmable timer's frequency is set to 6MHz.To mount this digital timer with Through Hole. The minimum operating temperature of the chip must not be lower than -55°C. It's best to use the timer clock when the temperature is below 125°C. The timer clock contains 14 pins. The supply voltage of the programmable timer can rate 5V. The sum of the IC chip pins is 14 . The number of the chip's terminations sums up to 14. The timer clock has 927.99329mg in weight. The minimum supply voltage of the chip must not be lower than 3V. The supply voltage of this chip should not exceed 18V. The timer clock runs quiescent current at 100μA. The number of Timers/Counters on the device is 1.
CD4541BEE4 Features
Operate frequency at 6MHz
Max Operating temperature at -55°C
Quiescent Current at 100μA
1 Timers/Counters
CD4541BEE4 Applications
There are a lot of Texas Instruments
CD4541BEE4 Programmable Timers & Oscillators applications.
- White Goods
- Electric Vehicles
- Always On Systems
- Clutch Actuator circuit
- Car Door Handle circuit
- Smart Key
- Remote current sensor
- Intruder Detection
- Power-On Reset Timer
- Long Time One Shot
