CD4518BPWR Overview
The device is packaged in the 16-TSSOP (0.173, 4.40mm Width)type. This configuration uses 16terminations. By supplying 5Vwith a voltage of 5V , the device can be operated in a completely flexible manner. An interconnection of 2elements is provided by wires. All component pins are equal to 16. There is a package in the form of Tape & Reel (TR). As part of the circuit, there are 16pins that connect other components. The Surface Mountway is used to mount it. Due to the fact that it is a member of the 4000Bseries, it has a wide range of applications. Logic type BCD Counter is adopted. Ideally, the operating temperature should be set to -55°C~125°C. This device is mounted in the Surface Mountposition. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. An array consists of 4bits for each element. Based on the Pbfree code, the result may be yes. It is important to note that GATED CLOCK; SCHMITT TRIGGER ON CLOCK INPUTare really important features of this electronic device. Further related parts may be found under the base part number CD4518. For its packaging, TRis employed. From the voltage source, there is a voltage of 5/15V volts. As low as 3V Vsup is the minimum supply voltage. The frequency of the system is 8MHz. It is possible to provide a voltage up to 18V (Vsup). The device consumes a quiescent current of 100μA volts.
CD4518BPWR Features
Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
4 bits per element
GATED CLOCK; SCHMITT TRIGGER ON CLOCK INPUT
Frequency of 8MHz
CD4518BPWR Applications
There are a lot of Texas Instruments
CD4518BPWR Counters & Dividers applications.
- Analog multiplexing and demultiplexing
- Digital multiplexing and demultiplexing
- Signal gating
- Frequency dividing circuits
- Time delay circuits
- Communications Digital Frequency Synthesizers;
- VHF, UHF, FM, AM, etc.
- Fixed or Programmable Frequency Division
- Time Out Timer for Consumer-Application Industrial Controls
- Timing applications
