Name: CD4053BPWR
Brand: Texas Instruments
SKU: CD4053BPWR
Price: 0.61000 USD
Availability: InStock

new-10%

CD4053BPWR

Manufacturer part number:CD4053BPWR

Manufacturer:Texas Instruments

Description:SPDT 240Ohm Analog Switches BREAK-BEFORE-MAKE CD4053 16 Pins 100nA 5V 16-TSSOP (0.173, 4.40mm Width)

Case Package:SOT-23

Datasheet:CD4053BPWR Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	61.887009mg
Operating Temperature	-55°C~125°C TA
Packaging	Cut Tape (CT)
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	240Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	3
Supply Voltage	5V
Base Part Number	CD4053
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	18V
Polarity	Non-Inverting
Power Supplies	5/15V
Number of Channels	2
Number of Circuits	3
Max Supply Voltage	20V
Min Supply Voltage	3V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	80nA
Nominal Supply Current	100mA
Propagation Delay	60 ns
Quiescent Current	80nA
Turn On Delay Time	720 ns
Input Voltage (Min)	-0.5V
Logic Function	Demultiplexer, Multiplexer
Input Voltage (Max)	20.5V
Number of Inputs	6
Voltage - Supply, Single/Dual (±)	3V~20V ±2.5V~9V
Supply Type	Dual, Single
Bandwidth	30MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	450 ns
Max Dual Supply Voltage	9V
On-State Resistance (Max)	240Ohm
Min Dual Supply Voltage	2.5V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	40 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	0.2pF 9pF
On-state Resistance Match-Nom	15Ohm
Switch Circuit	SPDT
Channel-to-Channel Matching (ΔRon)	5 Ω
Crosstalk	-40dB @ 6MHz
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	240Ohm
Normal Position	NC
Signal Current-Max	0.01A
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CD4053BPWR Product Details

CD4053BPWR Overview

The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). To ensure high reliability, a new packaging method Cut Tape (CT) is used. Multiplexers like this are mounted in the Surface Mount position. 2:1 is the number of circuits in the multiplexer and demultiplexer. An extended operating temperature of -55°C~125°C TA degrees Celsius. In total, there have been 16 terminations. The electronic part delivers high-quality output through its 2 channels. Powered by a 5V voltage supply, the electrical part should be switched on and run. Into the electrical component body are injected 16 pins. SPDT switching circuits are used in these analog switch ics. It consists of 3 circuits. Try searching with CD4053 to find analog multiplexer variants. It has an internal resistance of 240Ohm. You can find the functions of the 16 pins in the datasheets. Theswitch device is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 20V. Digital switch that provides Dual, Single power at a cost-effective price. The lowest voltage fed to the electronic component should be 3V. For this digital switch to work, 80nA current would suffice. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 9V. When using dual power supplies, you should attach at least 2.5V. This product is integrated with an analog integrated circuit (IC) of type SINGLE-ENDED MULTIPLEXER. This analog switch ic utilizes SEPARATE OUTPUT output. A voltage of 18V can be used to operate the electronic component. The electrical component supports 6 inputs. The transfer of data can be performed over 30MHz bandwidths. This electronic component presents a Drain to Source resistance of 240Ohm.