CD4027BME4 Overview
The flip flop is packaged in a case of SOIC. D latch consists of 2 elements. Terminations are 16. The power source is powered by 5V. Electronic part Surface Mountis mounted in the way. With its 16pins, it is designed to work with most electronic flip flops. In this device, the clock edge trigger type is Positive Edge. The design is based on 2bits. Due to its reliability, this T flip flop is well suited for TUBE. To operate, the chip has a total of 1 output lines. This D latch consumes 20μA quiescent current at all. It is set to -4.2mAfor the high level output current. It is set to 6.8mAfor the low level output current. If the operating temperature is lower than 125°C, it is recommended. It should be higher than -55°Cwhen the system is operating. Normally, it operates with a voltage of 3VV as its minimum supply voltage. It supports a maximum supply voltage of 18V volts. This frequency can be achieved 24MHz. In this case, it uses a J-K FLIP-FLOP logic IC. It is equipped with 2 functions . The D latch is equipped with 16 pins.
CD4027BME4 Features
16 pins
2 Bits
2 Functions
16 pin count
CD4027BME4 Applications
There are a lot of Texas Instruments
CD4027BME4 Flip Flops applications.
- Data storage
- Data transfer
- Latch
- Registers
- Memory
- Frequency division
- Memory
- Event Detectors
- Data Synchronizers
- Asynchronous counter
