CD4024BNSR Overview
The device is packaged in the 14-SOIC (0.209, 5.30mm Width)type. This configuration uses 14terminations. By supplying 5Vwith a voltage of 5V , the device can be operated in a completely flexible manner. An interconnection of 1elements is provided by wires. All component pins are equal to 14. There is a package in the form of Tape & Reel (TR). As part of the circuit, there are 14pins that connect other components. The Surface Mountway is used to mount it. Due to the fact that it is a member of the 4000Bseries, it has a wide range of applications. Logic type Binary Counter is adopted. Ideally, the operating temperature should be set to -55°C~125°C. This device is mounted in the Surface Mountposition. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. An array consists of 7bits for each element. As far as the device is concerned, there are 12bits of information. Based on the Pbfree code, the result may be yes. Further related parts may be found under the base part number CD4024. For its packaging, TRis employed. As low as 3V Vsup is the minimum supply voltage. The frequency of the system is 24MHz. The device consumes a quiescent current of 100μA volts.
CD4024BNSR Features
Embedded in the 14-SOIC (0.209, 5.30mm Width) package
7 bits per element
Frequency of 24MHz
CD4024BNSR Applications
There are a lot of Texas Instruments
CD4024BNSR Counters & Dividers applications.
- Analog multiplexing and demultiplexing
- Digital multiplexing and demultiplexing
- Signal gating
- Frequency dividing circuits
- Time delay circuits
- Communications Digital Frequency Synthesizers;
- VHF, UHF, FM, AM, etc.
- Fixed or Programmable Frequency Division
- Time Out Timer for Consumer-Application Industrial Controls
- Timing applications
