CD4013BME4 Overview
The flip flop is packaged in 14-SOIC (0.154, 3.90mm Width). There is an embedded version in the package Tube. The output it is configured with uses Differential. It is configured with a trigger that uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. It operates with a supply voltage of 3V~18V. Currently, the operating temperature is -55°C~125°C TA. There is D-Type type of electronic flip flop associated with this device. The 4000Bseries comprises this type of FPGA. There should be no greater frequency than 24MHzon its output. There is 4μA quiescent consumption. In 14terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The CD4013family includes it. An input voltage of 5Vpowers the D latch. Its input capacitance is 5pF farads. The electronic part is mounted in the way of Surface Mount. It is designed with 14 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. The part you are looking for is included in FF/Latch. It is imperative that the supply voltage (Vsup) is maintained above 3Vin order to ensure normal operation. Its flexibility is enhanced by 2 circuits. In order to operate, the chip has 1 output lines. There is a consumption of 20μAof quiescent current from it.
CD4013BME4 Features
Tube package
4000B series
14 pins
CD4013BME4 Applications
There are a lot of Texas Instruments CD4013BME4 Flip Flops applications.
- Divide a clock signal by 2 or 4
- 2 – Bit synchronous counter
- Event Detectors
- Count Modes
- Clock pulse
- Set-reset capability
- ESD performance
- Common Clocks
- Power down protection
- Registers
