CCB3T1G125QDCKRQ1 Overview
Digital switch is provided in the 5-TSSOP, SC-70-5, SOT-353 for the purpose of saving board space.Digi-Reel? is the method used for packaging.For mounting, digital switch ic uses the method Surface Mount.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.As long as the operating temperature is -40°C~125°C, turn signal switch will not be influenced by external factors.Using a 2.3V~3.6V supply voltage provides digital controlled switch's superior flexibility for designers.The multiplexers can be used for a wide range of applications since they are members of Automotive, AEC-Q100, 74CB series.There are 5 terminations included in its basic configuration.To find signal switch's related components, a base part number of CB3T1G125 may also be used.For multiplexer's system, a voltage of 3.3V is supplied.A component pin count of 5 is found on this turn signal switch.GULL WING represents the end of conductors.There is a type of supply Single that is employed in this case.The board is configured with 5 pins.It is mounted in the way of Surface Mount.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 2.3V.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.No external influence consumes 20μA current of multiplexer ic.In terms of resistance, it has a value of 8Ohm.A total of 1 channels are used for transmission in the turn signal switch's circuit.
CCB3T1G125QDCKRQ1 Features
Supplied in the 5-TSSOP, SC-70-5, SOT-353 package
Adopting a supply type of Single
CCB3T1G125QDCKRQ1 Applications
There are a lot of Texas Instruments CCB3T1G125QDCKRQ1 Signal Switches / Multiplexers / Decoders applications.
- Medium scale TV wall
- Data communication
- Signal router
- Communication system
- High-performance memory systems
- Make half adder
- Home automation system
- Time division multiplexing system
- Analog, digital or video signal switching
- Logic gates for other digital devices
