BUF01901AIDRCRG4 Overview
The op amp is delivered to you in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 10. The pins on this board total to 10 in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. A total of 10 pins are present on the instrumentation amplifier. As long as the supply current of the chip does not exceed 900μA, this op amp ic can operate. During the manufacturing process, this buffer amplifier is divided into 1 circuits. For the buffer op amp to operate properly, it must be above the temperature of -40°C degrees Celsius. No temperature greater than 95°C should be used. It should be noted that the other type of analog integrated circuit used in this instrumentation amplifier is known as the ANALOG CIRCUIT. It is important to note that this buffer op amp also has the following extra benefit: ALSO REQUIRES 2V TO 5.5V DIGITAL SUPPLY.
BUF01901AIDRCRG4 Features
10 Pins
supply voltage of 5V
BUF01901AIDRCRG4 Applications
There are a lot of Texas Instruments
BUF01901AIDRCRG4 Instrumentational OP Amps applications.
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
