BQ24765RUVT Overview
I found it in the Tape & Reel (TR) package, which comes with everything you need.The package 34-VFQFN Exposed Pad includes a version of it.A Surface Mount mounting type is assigned to the device.If the temperature is set to -40°C~125°C TJ, reliable performance will be assured.A analog IC of BATTERY CHARGE CONTROLLER has been used in the design of this device.Device charging requires Constant - Programmable current.The base part number BQ24765 represents its related parts.As far as the terminations are concerned, there are 34.This battery pack has a voltage of 19.2V Max.The device has 34 pins in total.You need 34 pins for it to work.As long as the supply voltage is 24V, it is capable of withstanding the voltage.Using a 19.2V output voltage results in high efficiency.There is a constant output current of 4A when it is operating.The device can operate at as low a supply voltage as possible, such as 7V.It was determined during the design process that Vsup (maximum supply voltage) should be set to 12mA.As far as the input voltage is concerned, it has a minimum of 7V volts.There is 20V voltage input on the device.700kHz switching frequency is used by the part.It is required that a maximum supply voltage of 19.2V be applied as the output voltage for this operation.There is a reduction in the maximum output current during operation to 8.064A.
BQ24765RUVT Features
Battery pack voltage of 19.2V Max
Switching frequency of 700kHz
34-VFQFN Exposed Pad package
BQ24765RUVT Applications
There are a lot of Texas Instruments
BQ24765RUVT Battery Chargers ICs applications.
- Forklift
- Pallet jacks
- Personnel carriers
- Maintenance shops
- Rental fleets
- Truck dealers
- Floor scrubber
- Material handling
- Man lift
- Boat
