BQ24108RHLRG4 Overview
There is a package for Tape & Reel (TR) in which it can be found.We've included it in the 20-VFQFN Exposed Pad package so that it's easier to use.Mounting type for the device is Surface Mount.It is recommended that the temperature be set to -40°C~85°C TA in order to ensure reliable performance.In order to operate this device, an analog IC of BATTERY CHARGE CONTROLLER must be used.The device requires Constant - Programmable current to charge.The related parts of the base part number BQ24108 can be found by following the order of the base part number.It contains a total of 20 terminations.As far as the battery pack is concerned, it is 4.2V.It is equipped with 20 pins.There are various programmable features, such as Current, Timer.It requires pins 20 to function.In order for the device to operate properly, the supply voltage should not exceed 16V.When the output voltage is 4.2V, high efficiency is possible.In this case, the output current of the device is set to 2A.A supply voltage of 4.35V is suitable for it, because it can operate with a low supply voltage.Vsup (maximum supply voltage) is set in the command to 5mA.There are several electrical components in the series bqSWITCHER™.A minimum input voltage of 4.3V volts is required for this device.With 1.1MHz switching frequency, the part operates.
BQ24108RHLRG4 Features
Battery pack voltage of 4.2V
Switching frequency of 1.1MHz
20-VFQFN Exposed Pad package
BQ24108RHLRG4 Applications
There are a lot of Texas Instruments
BQ24108RHLRG4 Battery Chargers ICs applications.
- Golf carts
- Forklift
- Pallet jacks
- Personnel carriers
- Maintenance shops
- Rental fleets
- Truck dealers
- Floor scrubber
- Material handling
- Man lift
