BQ2003S Overview
I found it in the Tube package, which comes with everything you need.The package 16-SOIC (0.295, 7.50mm Width) includes a version of it.A Surface Mount mounting type is assigned to the device.If the temperature is set to 0°C~70°C TA, reliable performance will be assured.A analog IC of BATTERY CHARGE CONTROLLER has been used in the design of this device.Device charging requires Constant current.The base part number BQ2003 represents its related parts.As far as the terminations are concerned, there are 16.The device has 16 pins in total.Features such as Timer, Voltage are programmable.You need 16 pins for it to work.As long as the supply voltage is 5.5V, it is capable of withstanding the voltage.Using a 5.5V output voltage results in high efficiency.There is a constant output current of 2A when it is operating.The device can operate at as low a supply voltage as possible, such as 4.5V.It was determined during the design process that Vsup (maximum supply voltage) should be set to 2.2mA.As far as the input voltage is concerned, it has a minimum of 4.5V volts.The supply of the gadget is running with 750μA current.There is 5V voltage input on the device.It is recommended to set the supply voltage to 5V in order to maximize the efficiency of the system.300kHz switching frequency is used by the part.
BQ2003S Features
Switching frequency of 300kHz
16-SOIC (0.295, 7.50mm Width) package
BQ2003S Applications
There are a lot of Texas Instruments
BQ2003S Battery Chargers ICs applications.
- Forklift
- Pallet jacks
- Personnel carriers
- Maintenance shops
- Rental fleets
- Truck dealers
- Floor scrubber
- Material handling
- Man lift
- Boat
