BQ2003PN Overview
There is a package for Tube in which it can be found.We've included it in the 16-DIP (0.300, 7.62mm) package so that it's easier to use.Mounting type for the device is Through Hole.It is recommended that the temperature be set to 0°C~70°C TA in order to ensure reliable performance.In order to operate this device, an analog IC of BATTERY CHARGE CONTROLLER must be used.The device requires Constant current to charge.The related parts of the base part number BQ2003 can be found by following the order of the base part number.It contains a total of 16 terminations.It is equipped with 16 pins.There are various programmable features, such as Timer, Voltage.It requires pins 16 to function.In order for the device to operate properly, the supply voltage should not exceed 5.5V.When the output voltage is 5.5V, high efficiency is possible.In this case, the output current of the device is set to 2A.A supply voltage of 4.5V is suitable for it, because it can operate with a low supply voltage.Vsup (maximum supply voltage) is set in the command to 2.2mA.A minimum input voltage of 4.5V volts is required for this device.Its supply carries 750μA current.Voltage input for the device is 5V.The best efficiency can be achieved by setting the supply voltage to 5V.With 300kHz switching frequency, the part operates.
BQ2003PN Features
Switching frequency of 300kHz
16-DIP (0.300, 7.62mm) package
BQ2003PN Applications
There are a lot of Texas Instruments
BQ2003PN Battery Chargers ICs applications.
- Golf carts
- Forklift
- Pallet jacks
- Personnel carriers
- Maintenance shops
- Rental fleets
- Truck dealers
- Floor scrubber
- Material handling
- Man lift
