AM26C31IDG4 Overview
This driver chip is excellent for driving common LEDs due to its enhanced 16-SOIC (0.154, 3.90mm Width) package.There is a Tube package for this receiver.This Driver can transceiver is a versatile part that has enabled many solutions to serve a variety of purposes.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.Power supply requirements for this differential driver are 4.5V~5.5V.It is possible to have up to 4/0 receivers/drivers in use simultaneously with this electronic part.The operating temperature of this ic receiver is -40°C~85°C. It is primarily designed for applications with low temperatures.An output voltage range of 5V is sufficient to run this line driver ic efficiently.In this package, you will find 16 market-standard pinouts for this transceiver.Since the part number AM26C31 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.An enhanced power dissipation driver IC with 16 pins.This ic receiver provided a 4-bit resolution capability. This transceiver module is designed to operate from an input voltage supply of 5V.This driver IC is designed to operate from a 5V power supply.Ensure that the VCC pin of the ic receiver receives sufficient but not more than 3mA of input current.Input voltage is set to a value of 100μA, and this integrating circuit is capable of driving LEDs with that voltage.Using an antenna, there are 4 transmitters, which produce radio waves in order to transmit or send data.
AM26C31IDG4 Features
Tube package
16 pin count
16 pins
5V power supply
AM26C31IDG4 Applications
There are a lot of Texas Instruments AM26C31IDG4 Drivers/Receivers/Transceivers applications.
- Single to Multimode Fiber Conversion
- Switches
- Portable radio
- Remote controls
- Point-to-point networking
- Wireless transmission
- Home theater wiring-free
- Wireless security systems
- IPTV front end
- Car alarm systems
