ADC0832CIWMX/NOPB Overview
The analogue to digital converter is designed with 8 Bits.The AD converter is embedded in the 14-SOIC (0.295, 7.50mm Width) package.The ADC converter is packaged in the way of Tape & Reel (TR).The ADC converter is equipped with 1 Functions .There are 14 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 2 channels.The is equipped with 14 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 31.25k Hz.The input type of this electronic AD converter is Differential, Pseudo-Differential, Single Ended.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-ADC.The architecture that analogue to digital converter's core adopts is SAR.There are 14 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 4.5V~6.3V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to ADC0832 family.Depending on the supply type, analogue to digital converters can be categorized by Single.The supply/digital voltage of this electrical AD converter is 4.5V~6.3V.Surface Mount can be used to mount the analogue to digital converter.The ADC converter operates with the maximal supply voltage of 6.3V.2 inputs are employed.It operates with the minimal supply voltage of 4.5V.This electrical digital converter operates from a supply voltage of 5V.The ADC converter operates from 5V power supplies.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 800mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 8.5mW.The ADC converter consists of 1 elements.
ADC0832CIWMX/NOPB Features
1 Functions
14 basic kinds of terminations
14 pin count
Minimal supply voltage of 4.5V
5V power supplies
1 elements
ADC0832CIWMX/NOPB Applications
There are a lot of Texas Instruments ADC0832CIWMX/NOPB ADC applications.
- Telecommunications
- Multiplexed Data Acquisition Systems
- RADAR processing, digital oscilloscopes
- Spectrum Analysis
- Industrial Process Control
- Imaging Systems
- Transducer
- Communication test equipment
- Micro and pico cell systems, software radios
- CMOS Image sensors for mobile applications
