8601401HA Overview
An op amp of this type is a COMPARATOR-type. As far as the packaging is concerned, buffer op amp is delivered in a Rail/Tube case. A total of 14 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. A type of Comparator op amp ic can be identified by the fact that this is a type of Comparator device. In total, the buffer amplifier consists of 10 pins. Op amp ic rates 3.8mV for input offset voltage. There should be no change in the voltage gain at 92.04dB. There are a total of 2 channels available on the op amps. One of its many advantages is that buffer op amp outputs OPEN-COLLECTOR signals. This instrumentation amplifier cannot operate below -55°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 125°C. It is important to keep in mind that the power supply voltage of this electric component is below 36V, which is suitable. Keeping the linear amplifier's supply voltage above 5V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 18V volts.
8601401HA Features
14 Pins
supply voltage of 15V
92.04dB voltage gain
Output Type: OPEN-COLLECTOR
8601401HA Applications
There are a lot of Texas Instruments
8601401HA Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
