74LVC1G3157DRLRG4 Overview
The electrical component comes in SOT-553-6 packaging, which makes it convenient to ship overseas. In total, 6 terminations have occurred. A electrical component with 1 channels is capable of high-quality output. When the electronic component is given a voltage of 2.3V, it should be turned on and run. Into the electrical component body are injected 6 pins. A 15Ohm internal resistance characterizes this multiplexer. The datasheets for the 6 pins explain the functions. The analog multiplexer shown here is a typical Multiplexers or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. A analog switch ic that has a cost-effective Single supply type. It is recommended to use 1.65V as the lowest voltage for the electrical part. The analogue multiplexer could operate on 1μA current. A voltage higher than 10μA may cause damage to the switch multiplexer. Among the inputs that can be operated are the 1 inputs. It is possible to transfer data over a 300MHz-bandwidth. A temperature above 125°C is not suitable for operation of the analogue multiplexer. This digital multiplexer has 2 outputs.
74LVC1G3157DRLRG4 Features
1 Channels
1μA Supply Current
Bandwidth: 300MHz
74LVC1G3157DRLRG4 Applications
There are a lot of Texas Instruments
74LVC1G3157DRLRG4 Analog Switches & Multiplexers ICs applications.
- Audio and video switching
- Automatic test equipment
- Precision data acquisition
- Battery-powered systems
- Sample-and-hold systems
- Communication systems
- Data Acquisition Systems
- Relay Replacement
- Battery Powered Systems
- Existing multiplexer applications (both fault-protected and nonfault-protected)
