74LVC1G139DCURG4 Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 8-VFSOP (0.091, 2.30mm Width).It is packaged according to the Tape & Reel (TR) method.Digital switch ic adheres to a mounting method of Surface Mount.The analog IC used in the multiplexers can be referred to as Decoder/Demultiplexer.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.A supply voltage of 1.65V~5.5V provides digital controlled switch's superior flexibility for designers.The multiplexers from 74LVC series can be used for a wide range of applications.Its basic configuration includes terminations in the 8 range.The base part number is 74LVC1G139, which is also useful when looking up signal switch's related components.The multiplexer's system works with 1.8V voltage.This turn signal switch contains 8 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.In this case, the supply type is Single.A configuration of 8 pins is used.The mount is in Surface Mount.The logic switch is a member of the LVC/LCX/Z family.It is advisable to keep the maximum supply voltage (Vsup) at 5.5V so as to avoid some unnecessary failures.It is provided that 3.3V has a power supply in order to function normally.Part number Decoder/Drivers indicates that the digital switch ic is an electronic part.There are no external influences on this multiplexer ic, so it consumes 10μA current.TAPE AND REEL is used to package the switches.The multiplexers have 2 input lines used to accept voltage levels.There are 4 output lines on the signal source.
74LVC1G139DCURG4 Features
Supplied in the 8-VFSOP (0.091, 2.30mm Width) package
Adopting a supply type of Single
Power supplies of 3.3V
2 input lines
4 output lines
74LVC1G139DCURG4 Applications
There are a lot of Texas Instruments 74LVC1G139DCURG4 Signal Switches / Multiplexers / Decoders applications.
- High-performance memory systems
- Make full adder
- Memory system of computers
- CNC machines
- HDMI applications
- Transmission from the computer system of a satellite
- Logic gates for other digital devices
- Automatic Monitoring systems
- Medium scale TV wall
- Signal router
