74ACT11373DWG4 Overview
In the SOIC package, it can be found as an embedded module. The design of this electronic part contains 8 bits. This device has been designed with 24 terminations available. The device works with a voltage of 5V for its supply voltage. There are 24 pins attached to it. It is a member of the ACT family of electronic devices. This board has 24 pins on it, which is what it is designed for. Electronic parts are mounted using the Surface Mount method. This device has 2 ports on board, which are all available at the same time. This part can be found within the FF/Latches subcategory. There is 5V power supply for it. If you want to achieve high efficiency, make sure the supply voltage is at 5V. It consumes 8μA current from its quiescent state without being affected by external factors at all. The superior flexibility of this circuit can be attributed to the use of 8 circuits. 24mA is set as the low level output current. -24mA is set as the high level output current. It is recommended to work at a temperature lower than 85°C. In order for the system to operate properly, the operating temperature should be higher than -40°C. It is capable of providing a maximum supply voltage of 5.5V. In order for the machine to operate, the supply voltage must be 4.5V. A logic IC that is used in this application is BUS DRIVER. The output current of this device is 24mA, which makes it a very flexible design element.
74ACT11373DWG4 Features
SOIC package
8 Bits
24 pin count
24 pins
5V power supplies
74ACT11373DWG4 Applications
There are a lot of Texas Instruments
74ACT11373DWG4 Latches applications.
- Digital bus buffer
- Flip-flops
- Parallel data synchronization
- Parallel data storage
- Shift register
- Pattern generators
- Automotive Infotainment
- Automotive Cluster
- Automotive ADAS
- Automotive Body Electronics
