5962-8760401GA Overview
It is packaged in an TO-5-case that protects the operational amplifiers from damage. An op amp of this type is a OPERATIONAL AMPLIFIER-type. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 4V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 2mV for input offset voltage. Maintain 112.04dB as the voltage gain. There are a total of 1 channels available on the op amps. This instrumentation amplifier cannot operate below -55°C degrees Celsius. You should only use instrumentation amplifier at temperatures that are no higher than 125°C. A voltage rating of 2 is indicated for the op amp's operating supply voltage. It is important to keep in mind that the power supply voltage of this electric component is below 40V, which is suitable. Keeping the linear amplifier's supply voltage above 1.1V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 20V volts.
5962-8760401GA Features
8 Pins
supply voltage of 4V
112.04dB voltage gain
5962-8760401GA Applications
There are a lot of Texas Instruments
5962-8760401GA Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
