86-100A-C Overview
As a convenience, this transducer is included in Cylinder. Temperature should be set at -40°C~125°C on transducers in order for them to work reliably. It is possible for the transducers to operate at a maximum temperature of 70°C. Temperatures below -40°C are unacceptable for the transducers. A nominal supply current of 1.5mA can run the transducers normally. In order for the transducers to work, the voltage discharged by them should be 100mV.
86-100A-C Features
Moisture Sensitivity Level: 1 (Unlimited)
Package / Case: Cylinder
Operating Temperature: -40°C~125°C
168mm Cable Length
Operating Pressure: 100PSI (689.48kPa)
86-100A-C Applications
There are a lot of TE Connectivity Measurement Specialties
86-100A-C Transducers applications.
- Hydrogen Storage
- Refrigerant pressure monitoring in HVAC/R systems
- Dry air system pressure, process controls and automation
- Dry air system monitoring
- Hydraulic, brake, and engine oil fluid pressure monitoring
- Air brake pressure monitoring
- Vertical velocity indication (e.g. rise/sink speed)
- Internet of things
- Enhancement of GPS navigation
- Indoor navigation & localization (floor detection, elevator detection)
