Name: VNV10N07
Brand: STMicroelectronics
SKU: VNV10N07
Availability: InStock

new-10%

VNV10N07

Manufacturer part number:VNV10N07

Manufacturer:STMicroelectronics

Description:N-Channel PMIC OMNIFET?, VIPower? Series VNV10 10 Pin PowerSO-10 Exposed Bottom Pad

Case Package:SOT-23

Datasheet:VNV10N07 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Lifecycle Status	NRND (Last Updated: 8 months ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	PowerSO-10 Exposed Bottom Pad
Number of Pins	10
Packaging	Tube
Series	OMNIFET™, VIPower™
JESD-609 Code	e3
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	10
ECCN Code	EAR99
Resistance	100mOhm
Terminal Finish	Matte Tin (Sn) - annealed
Max Power Dissipation	50W
Technology	MOS
Terminal Position	DUAL
Terminal Form	GULL WING
Number of Functions	1
Base Part Number	VNV10
Pin Count	10
Number of Outputs	1
Output Type	N-Channel
Max Output Current	10A
Operating Supply Voltage	18V
Interface	On/Off
Nominal Supply Current	250μA
Output Configuration	Low Side
Power Dissipation	50W
Output Current	7A
Voltage - Supply (Vcc/Vdd)	Not Required
Max Supply Current	250μA
Input Type	Non-Inverting
Switch Type	General Purpose
Output Characteristics	OPEN-DRAIN
Output Current per Channel	7A
Continuous Drain Current (ID)	10A
Output Polarity	TRUE
Ratio - Input:Output	1:1
Input Characteristics	SCHMITT TRIGGER
Voltage - Load	55V Max
Fault Protection	Current Limiting (Fixed), Over Temperature, Over Voltage
Drain to Source Breakdown Voltage	70V
Turn On Time	0.9 μs
Output Peak Current Limit-Nom	10A
Rds On (Typ)	100m Ω (Max)
Drain to Source Resistance	100mOhm
Turn Off Time	6 μs
Built-in Protections	TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL
Height Seated (Max)	3.75mm
Length	9.4mm
Width	7.5mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

VNV10N07 Product Details

VNV10N07 Overview

The LED driver's packaged as a Tube.There is a package for it in the PowerSO-10 Exposed Bottom Pad package.The lighting driver has the mounting type Surface Mount.This switch is of type General Purpose.In this LED driver, there are no outputs available.A voltage of Not Required is used to power it.The maximum output voltage of this LED driver is N-Channel volts.As you can see, it comes from the VNV10 family.As a result, there are 10 terminations.The operation is performed through the 10 pins.It is important to note that the LED driving board has 1 functions.This operation requires the maximum output current to be decreased to 10A.The lighting driver is mounted in the direction of Surface Mount.10 pins are connected to it in total.The LED driver has 100mOhm resistance.These electrical components are part of the OMNIFET?, VIPower? series.This results in a 7A output current.A supply voltage of 18V is recommended for maximum efficiency.It has a maximum current requirement of 250μA.