Name: VND7N0413TR
Brand: STMicroelectronics
SKU: VND7N0413TR
Availability: InStock

new-10%

VND7N0413TR

Manufacturer part number:VND7N0413TR

Manufacturer:STMicroelectronics

Description:N-Channel 2.25mm PMIC OMNIFET II?, VIPower? Series VND7N 3 Pin TO-252-3, DPak (2 Leads + Tab), SC-63

Case Package:SOT-23

Datasheet:VND7N0413TR Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	TO-252-3, DPak (2 Leads + Tab), SC-63
Number of Pins	3
Operating Temperature	-40°C~150°C TJ
Packaging	Tape & Reel (TR)
Series	OMNIFET II™, VIPower™
JESD-609 Code	e3
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	2
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn) - annealed
Voltage - Rated DC	42V
Max Power Dissipation	60W
Technology	MOS
Terminal Position	SINGLE
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Terminal Pitch	2.25mm
Current Rating	7A
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	VND7N
Pin Count	3
JESD-30 Code	R-PSSO-G2
Number of Outputs	1
Output Type	N-Channel
Max Output Current	4A
Interface	On/Off
Nominal Supply Current	250μA
Output Configuration	Low Side
Power Dissipation	60W
Output Current	4A
Voltage - Supply (Vcc/Vdd)	Not Required
Input Type	Non-Inverting
Switch Type	General Purpose
Output Characteristics	OPEN-DRAIN
Continuous Drain Current (ID)	7A
Output Polarity	TRUE
Ratio - Input:Output	1:1
Input Characteristics	SCHMITT TRIGGER
Voltage - Load	31V Max
Fault Protection	Current Limiting (Fixed), Over Temperature, Over Voltage
Drain to Source Breakdown Voltage	42V
Turn On Time	0.5 µs
Output Peak Current Limit-Nom	7A
Rds On (Typ)	140m Ω (Max)
Drain to Source Resistance	140mOhm
Turn Off Time	7 µs
Built-in Protections	TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL
Height Seated (Max)	2.4mm
Length	6.5mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

VND7N0413TR Product Details

VND7N0413TR Overview

A Tape & Reel (TR) is used to package it.It's included in the TO-252-3, DPak (2 Leads + Tab), SC-63 package.It has been mounted as Surface Mount on the LED driver.It owns the General Purpose switch type.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.In this LED driver, there are no outputs available.It uses a supply voltage of Not Required to operate.Voltage output is N-Channel volts at maximum.It comes under the family of VND7N.In total, there are 2 terminations.The operation is performed through the 3 pins.The LED driving board has a total of 1 functions.The maximum output current must drop to 4A to meet the operation criteria.Surface Mount is mounted in the way.There are 3 pins in total on this board.This electrical component is part of the OMNIFET II?, VIPower? series.When this is the case, the output current is set to 4A.