Name: VNB35NV0413TR
Brand: STMicroelectronics
SKU: VNB35NV0413TR
Availability: InStock

new-10%

VNB35NV0413TR

Manufacturer part number:VNB35NV0413TR

Manufacturer:STMicroelectronics

Description:N-Channel 2.54mm PMIC OMNIFET II?, VIPower? Series VNB35 3 Pin TO-263-3, D2Pak (2 Leads + Tab), TO-263AB

Case Package:SOT-23

Datasheet:VNB35NV0413TR Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	TO-263-3, D2Pak (2 Leads + Tab), TO-263AB
Number of Pins	3
Operating Temperature	-40°C~150°C TJ
Packaging	Tape & Reel (TR)
Series	OMNIFET II™, VIPower™
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	2
ECCN Code	EAR99
Resistance	13mOhm
Terminal Finish	Matte Tin (Sn) - annealed
Max Power Dissipation	125W
Terminal Position	SINGLE
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	245
Number of Functions	1
Terminal Pitch	2.54mm
Base Part Number	VNB35
Pin Count	3
JESD-30 Code	R-PSSO-G2
Number of Outputs	1
Output Type	N-Channel
Max Output Current	45A
Operating Supply Voltage	18V
Interface	On/Off
Nominal Supply Current	100μA
Output Configuration	Low Side
Power Dissipation	125W
Output Current	30A
Voltage - Supply (Vcc/Vdd)	Not Required
Max Supply Current	100μA
Input Type	Non-Inverting
Turn On Delay Time	12 μs
Switch Type	General Purpose
Output Current per Channel	30A
Drain to Source Voltage (Vdss)	70V
Turn-Off Delay Time	120 μs
Continuous Drain Current (ID)	35A
Ratio - Input:Output	1:1
Gate to Source Voltage (Vgs)	20V
Voltage - Load	36V Max
Fault Protection	Current Limiting (Fixed), Over Temperature, Over Voltage
Drain to Source Breakdown Voltage	70V
Output Peak Current Limit-Nom	45A
Rds On (Typ)	13m Ω (Max)
Drain to Source Resistance	10mOhm
Built-in Protections	TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL
Height Seated (Max)	4.826mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

VNB35NV0413TR Product Details

VNB35NV0413TR Overview

It is package in Tape & Reel (TR) case.It is included in the package TO-263-3, D2Pak (2 Leads + Tab), TO-263AB.Mounting type Surface Mount is selected for the LED driving board.General Purpose is the switch type it owns.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.The LED driver is equipped with 1 outputs.In order to operate, it requires a voltage supply of Not Required.Voltage output is N-Channel volts at maximum.It is a member of the VNB35 family.It contains 2 terminations.For operation, 3 pins are used.As far as the lighting driver is concerned, there are 1 functions.This results in the maximum output current dropping to 45A to meet the operation criteria.The lighting driver is mounted in the way of Surface Mount.There are 3 pins in total on this board.Currently, the LED driving board has 13mOhm resistance.Electrical components such as this are included in the OMNIFET II?, VIPower? series.This case has the output current set to 30A.For maximum efficiency, the supply voltage should be set to 18V.There is a maximum current requirement of 100μA for its operation.