Name: VNB35N07-E
Brand: STMicroelectronics
SKU: VNB35N07-E
Price: 5.42000 USD
Availability: InStock

new-10%

VNB35N07-E

Manufacturer part number:VNB35N07-E

Manufacturer:STMicroelectronics

Description:N-Channel 2.54mm PMIC OMNIFET?, VIPower? Series VNB35 3 Pin TO-263-3, D2Pak (2 Leads + Tab), TO-263AB

Case Package:SOT-23

Datasheet:VNB35N07-E Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	18 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	TO-263-3, D2Pak (2 Leads + Tab), TO-263AB
Number of Pins	3
Packaging	Tube
Series	OMNIFET™, VIPower™
Feature	Status Flag
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	2
ECCN Code	EAR99
Resistance	28mOhm
Max Power Dissipation	125W
Terminal Position	SINGLE
Terminal Form	GULL WING
Number of Functions	1
Terminal Pitch	2.54mm
Base Part Number	VNB35
JESD-30 Code	R-PSSO-G2
Number of Outputs	1
Output Type	N-Channel
Max Output Current	35A
Operating Supply Voltage	18V
Interface	On/Off
Nominal Supply Current	250μA
Output Configuration	Low Side
Power Dissipation	125W
Output Current	25A
Voltage - Supply (Vcc/Vdd)	Not Required
Max Supply Current	500μA
Input Type	Non-Inverting
Turn On Delay Time	200 ns
Switch Type	General Purpose
Max Input Voltage	18V
Drain to Source Voltage (Vdss)	70V
Nominal Input Voltage	18V
Turn-Off Delay Time	1 μs
Continuous Drain Current (ID)	35A
Ratio - Input:Output	1:1
Voltage - Load	55V Max
Fault Protection	Current Limiting (Fixed), Over Temperature, Over Voltage
Drain to Source Breakdown Voltage	70V
Turn On Time	800 μs
Output Peak Current Limit-Nom	35A
Rds On (Typ)	28m Ω (Max)
Drain to Source Resistance	28MOhm
Built-in Protections	TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL
Height	4.6mm
Length	10.28mm
Width	9.35mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

VNB35N07-E Product Details

VNB35N07-E Overview

The package is in the form of a Tube.It is included with the TO-263-3, D2Pak (2 Leads + Tab), TO-263AB package as well.A Surface Mount mounting is used for the LED driving board.There is a General Purpose switch type associated with it.The LED driver has 1 outputs.In order to operate, it requires a voltage supply of Not Required.Voltage output is N-Channel volts at maximum.It has a total of Status Flag features.It belongs to the VNB35 family.It has a total of 2 terminations.During operation, the 3 pins are used.There are 1 functions of the LED driver.The maximum output current is reduced to 35A to meet the operation criteria.In this case, it is mounted in the way of Surface Mount.It has a resistance of 28mOhm.The OMNIFET?, VIPower? series includes this electrical component.It is set to 25A in this case.The supply voltage should be set at 18V for best efficiency.It has a maximum input voltage of 18V volts.There is a maximum current requirement of 500μA for its operation.