Name: VNB35N07
Brand: STMicroelectronics
SKU: VNB35N07
Availability: InStock

new-10%

VNB35N07

Manufacturer part number:VNB35N07

Manufacturer:STMicroelectronics

Description:N-Channel 2.54mm PMIC OMNIFET?, VIPower? Series VNB35 3 Pin TO-263-3, D2Pak (2 Leads + Tab), TO-263AB

Case Package:SOT-23

Datasheet:VNB35N07 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	TO-263-3, D2Pak (2 Leads + Tab), TO-263AB
Number of Pins	3
Weight	329.988449mg
Packaging	Tube
Series	OMNIFET™, VIPower™
JESD-609 Code	e3
Feature	Status Flag
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	2
ECCN Code	EAR99
Resistance	28mOhm
Terminal Finish	Matte Tin (Sn)
Max Power Dissipation	125W
Technology	MOS
Terminal Position	SINGLE
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	245
Number of Functions	1
Terminal Pitch	2.54mm
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	VNB35
Pin Count	4
JESD-30 Code	R-PSSO-G2
Number of Outputs	1
Output Type	N-Channel
Max Output Current	35A
Operating Supply Voltage	18V
Interface	On/Off
Nominal Supply Current	250μA
Output Configuration	Low Side
Power Dissipation	125W
Output Current	25A
Voltage - Supply (Vcc/Vdd)	Not Required
Max Supply Current	250μA
Input Type	Non-Inverting
Switch Type	General Purpose
Output Characteristics	OPEN-DRAIN
Drain to Source Voltage (Vdss)	70V
Continuous Drain Current (ID)	35A
Output Polarity	TRUE
Ratio - Input:Output	1:1
Input Characteristics	SCHMITT TRIGGER
Voltage - Load	55V Max
Fault Protection	Current Limiting (Fixed), Over Temperature, Over Voltage
Drain to Source Breakdown Voltage	70V
Turn On Time	0.8 μs
Output Peak Current Limit-Nom	35A
Rds On (Typ)	28m Ω (Max)
Drain to Source Resistance	28mOhm
Built-in Protections	OVER CURRENT; THERMAL; ZENER CLAMP
Height Seated (Max)	4.6mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

VNB35N07 Product Details

VNB35N07 Overview

It is package in Tube case.It is included with the TO-263-3, D2Pak (2 Leads + Tab), TO-263AB package as well.The LED driver is mounted as Surface Mount.It owns the General Purpose switch type.By default, it is set to output 1.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.Features of the lighting driver are Status Flag.It is a member of the VNB35 family.There are 2 terminations in it.In order to operate, the 3 pins are used.It consists of 1 functions.The maximum output current must drop to 35A to meet the operation criteria.The LED driving board is mounted in the way of Surface Mount.The LED driver has a total of 4 pins.There is 28mOhm resistance on the LED driver.It belongs to the OMNIFET?, VIPower? series.When this case is used, the output current is set to 25A.Optimal efficiency requires a voltage of 18V.250μA is the maximum current required to operate it.