Name: VN03SP
Brand: STMicroelectronics
SKU: VN03SP
Availability: InStock

new-10%

VN03SP

Manufacturer part number:VN03SP

Manufacturer:STMicroelectronics

Description:N-Channel PMIC VN03 10 Pin 13V PowerSO-10 Exposed Bottom Pad

Case Package:SOT-23

Datasheet:VN03SP Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	PowerSO-10 Exposed Bottom Pad
Number of Pins	10
Operating Temperature	-40°C~150°C TJ
Packaging	Tube
JESD-609 Code	e3
Feature	Status Flag
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	10
ECCN Code	EAR99
Resistance	500mOhm
Terminal Finish	Matte Tin (Sn)
Subcategory	Peripheral Drivers
Max Power Dissipation	14W
Terminal Position	DUAL
Terminal Form	GULL WING
Number of Functions	1
Supply Voltage	13V
Base Part Number	VN03
Pin Count	10
Number of Outputs	1
Output Type	N-Channel
Max Output Current	9A
Operating Supply Voltage	26V
Interface	On/Off
Nominal Supply Current	50μA
Output Configuration	High Side
Power Dissipation	14W
Output Current	4A
Voltage - Supply (Vcc/Vdd)	Not Required
Max Supply Current	50μA
Input Type	Non-Inverting
Switch Type	General Purpose
Min Input Voltage	5.5V
Max Input Voltage	26V
Ratio - Input:Output	1:1
Voltage - Load	5.5V~26V
Driver Number of Bits	1
Fault Protection	Open Load Detect, Over Temperature
Output Peak Current Limit-Nom	0.9A
Rds On (Typ)	500m Ω (Max)
Built-in Protections	TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE
Height Seated (Max)	3.75mm
Length	9.4mm
Width	7.5mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

VN03SP Product Details

VN03SP Overview

A Tube is used to package it.It is included in the package PowerSO-10 Exposed Bottom Pad.In this case, the LED driving board is mounted as Surface Mount.It owns the General Purpose switch type.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.It is possible to use 1 outputs in the lighting driver.The LED driving board operates with a supply voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.Currently, the LED driving board is equipped with Status Flag features.I believe it belongs to the VN03 family.A total of 10 terminations have been found in it.The operation is performed through the 10 pins.Currently, there are 1 functions associated with the lighting driver.The maximum output current must drop to 9A to meet the operation criteria.High efficiency is possible at 13V supply voltage.It is positioned in the direction of Surface Mount.The LED driver has a total of 10 pins.500mOhm is the resistance of the lighting driver.This case results in a 4A output current.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.Optimal efficiency requires a voltage of 26V.Input voltage is limited to 26V volts.A voltage of 5.5V volts is the minimum input voltage.It requires 50μA current to operate.