Name: VIPER53SPTR-E
Brand: STMicroelectronics
SKU: VIPER53SPTR-E
Price: 4.06000 USD
Availability: InStock

new-10%

VIPER53SPTR-E

Manufacturer part number:VIPER53SPTR-E

Manufacturer:STMicroelectronics

Description:10 Terminations8.4V~19V 10 Pin VIPER53 AC to DC power converterVIPER? Series Up to 300kHz

Case Package:SOT-23

Datasheet:VIPER53SPTR-E Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	10 Weeks
Lifecycle Status	ACTIVE (Last Updated: 7 months ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	PowerSO-10 Exposed Bottom Pad
Number of Pins	10
Operating Temperature	-40°C~150°C TC
Packaging	Tape & Reel (TR)
Series	VIPER™
JESD-609 Code	e3
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	10
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn) - annealed
Subcategory	Switching Regulator or Controllers
Power Rating	65W
Max Power Dissipation	40W
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	VIPER53
Pin Count	10
Input Voltage-Nom	13V
Number of Channels	1
Analog IC - Other Type	SWITCHING REGULATOR
Operating Supply Current	9mA
Nominal Supply Current	9mA
Output Current	1.6A
Voltage - Supply (Vcc/Vdd)	8.4V~19V
Max Supply Current	11mA
Output Power	40W
Control Features	EN, Frequency Control, Soft Start
Topology	Flyback
Min Input Voltage	195V
Control Mode	CURRENT-MODE
Frequency - Switching	Up to 300kHz
Max Input Voltage	265V
Control Technique	PULSE WIDTH MODULATION
Switcher Configuration	SINGLE
Internal Switch(s)	Yes
Fault Protection	Current Limiting, Over Load, Over Temperature, Short Circuit
Output Isolation	Isolated
Voltage - Breakdown	620V
Voltage - Start Up	11.5V
Min Input Voltage (AC)	195V
Max Input Voltage (AC)	265V
Height Seated (Max)	3.65mm
Length	9.4mm
Width	7.5mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

VIPER53SPTR-E Product Details

VIPER53SPTR-E Overview

In the PowerSO-10 Exposed Bottom Pad package, the ac to dc converter is embedded.The AC/DC power converter type is Tape & Reel (TR) .A AC/DC converter of this type is mounted in the way of Surface Mount .Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TC degrees Celsius.An analog IC of type SWITCHING REGULATOR is employed in this AC DC converter.When the switching frequency reaches Up to 300kHz , the process is complete.The AC/DC converter is capable of being used when the supply voltage is 8.4V~19V (Vcc/Vdd).In total, it has 10 terminations.On this ac/dc converter, there are 10 pins.There are 10 pins in the ac-dc converter.Surface Mount are the recommended mounting method for the ac dc converters.It belongs to the family of VIPER? manufacturers.You can search similar acdc converters based on VIPER53 family.The following ac to dc conversions are contained in Switching Regulator or Controllers .In this AC to DC transformer, the output current is set to 1.6A .It is possible to read the REACH SVHC standard at: No SVHC .The AC to DC converter can be powered from the input voltage under 265V .The output power of a coverter is assumed to be 40W .An input voltage of less than 195V volts is acceptable for use with this AC to DC inverter.AC to DC converter is capable of handling a maximum supply current of 11mA A.The input voltage (AC) that can be applied in the AC to DC power converter should under 265V .1 channels are currently available.