VIPER17LDTR Overview
The ac to dc converter is embedded in 16-SOIC (0.154, 3.90mm Width) package.Tape & Reel (TR) case is available for the ac dc converter.A AC/DC converter of this type is mounted in the way of Surface Mount .Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.The AC DC converter uses a type SWITCHING REGULATOR analog integrated circuit.60kHz is the switching frequency.It can be used within the range of 8.5V~23.5V supply voltage (Vcc/Vdd).In total, it has 16 terminations.Approximately 16 pins are present on the ac/dc converter.The pins of the ac-dc converter count up to 16 .Surface Mount is the recommended mounting method for the ac dc converters.It is a member of VIPer? plus manufacturer family.The VIPER17 family can be used to search for similar acdc converters.There are 1 outputs to run.AC to DC converter is contained in Switching Regulator or Controllers .It has been set to 420mA for the output current.There is 800V output voltage from this AC/DC converter.You are able to read the REACH SVHC standard at: No SVHC .The AC to DC converter can be powered under 23.5V voltage.There is 10W output power generated by a coverter.It is possible to operate the AC to DC inverter with an input voltage that is less than 8.5V V.
VIPER17LDTR Features
Packaged with 16-SOIC (0.154, 3.90mm Width)
Switching Frequency at 60kHz
With 16 pins
Output Current at 420mA
VIPER17LDTR Applications
There are a lot of STMicroelectronics VIPER17LDTR AC DC Converters applications.
- AC?DC USB chargers for Cameras
- Power adapters for monitors
- AC/DC Adaptors/Chargers for E-books
- Home Appliance Applications
- Smartphones
- Automotive Clusters
- Air conditioners
- Utility meters
- AC-DC Output Power Conversion Applications
- Laptops
