TS924IN Overview
In order to protect the op amps, a 14-DIP (0.300, 7.62mm) case is used. An op amp ic of the General Purpose type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. There is a growing number of terminations approaching the number of 14. The pins on this board total to 14 in total. Please take in mind that op amp should be run at 3V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. In total, the buffer amplifier consists of 14 pins. In terms of input offset voltage, operational amplifier rates 3mV. This electronic part is recommended for mounting type Through Hole. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. In order for this instrumentation amplifier to operate, the supply current needs to be between 1mA and 10 . 106.02dB should be the voltage gain. Buffer op amp is equipped with 4 channels on the device. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals.
TS924IN Features
14 Pins
supply voltage of 3V
106.02dB voltage gain
Output Type: Rail-to-Rail
TS924IN Applications
There are a lot of STMicroelectronics TS924IN Instrumentational OP Amps applications.
- Integrator circuits
- Semiconductor detectors
- ECG equipment
- Proportional operation circuits
- Instrumentation
- Oscilloscopes
- Signal filtering
- High/low-pass filter circuit
- Large motor controllers
- Test equipment
