TS922IDT Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. Op amps are General Purpose types of amplifier on the chip. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. 8 pins are available on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 3mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . Using an 2mA supply current, this operational amplifier ics can be operated. There should be no change in the voltage gain. This op amp contains 2 circuits. There are a total of 2 channels available on the op amps. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. This op amp needs to be operated at a temperature of not less than -40°C degrees Celsius in order to function properly. A temperature greater than 125°C should not be used for the operation of this instrumentation amplifier. The linear amplifier consists of 2 different elements in total. To run supply current of buffer amplifier under 2mA. I would like to point out that this electrical component is capable of working from a voltage below 12V as far as the power supply is concerned. To keep the buffer amps' supply voltage higher than 2.7V. The linear amplifier has 2 amplifiers.
TS922IDT Features
106.02dB voltage gain
Output Type: Rail-to-Rail
TS922IDT Applications
There are a lot of STMicroelectronics TS922IDT Instrumentational OP Amps applications.
- Power transmission
- Communication
- Video data acquisition
- Computer workstations
- Home audio systems
- Measurements of Wheatstone bridge
- earphone
- Professional videography
- Weighing systems
- Video conversion and routing
