TS904ID Overview
In the package, you will find a SO-case to contain the op amp ic. OPERATIONAL AMPLIFIER-type instrumentation amplifiers are used in this application. A Bulk case is used for delivering the op amp. The number of terminations is approaching the 16 mark. In total, there are 16 pins on this op amp ic. This linear amplifier should be powered by an 3V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. An 16-pin op amp ic is included in the package. The input offset voltage is 10mV. There should be no change in the voltage gain. On the buffer amps, there are 4 channels that can be used. It is recommended that the temperature of this op amp ic should not fall below -40°C degrees Fahrenheit at any time. You should only use op amp buffer at temperatures that are no higher than 125°C. The operating supply voltage of the buffer op amp is rated at 8V. The electrical part is capable of being powered by a voltage of under 16V, which means that it can be used with any voltage supply. In order to ensure that the instrumentation amplifier's supply voltage remains above 2.7V, it is recommended to keep it higher. There should be a dual supply voltage of 8V for you to conduct this electrical part.
TS904ID Features
16 Pins
supply voltage of 3V
89.54dB voltage gain
TS904ID Applications
There are a lot of STMicroelectronics TS904ID Instrumentational OP Amps applications.
- Proportional counter tubes
- Precision measurement
- Radar
- High input resistance broadband
- Home audio systems
- earphone
- Displayers for aircraft and air transportation control systems
- Semiconductor detectors
- Large motor controllers
- Television
