TS831-3IZ-AP Overview
A total of 3 terminals are used to mount this power management. A Tape & Box (TB) package is used to package the power management. In this IC power you will find 1 functions for you to refer to. On this supervisor, there is a series of 1 channels that can be found. Please find attached TO-226-3, TO-92-3 (TO-226AA) (Formed Leads) functions for your reference in this IC power. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Manage ics operate at 5V supply voltages. A supply voltage of 1 is used to conduct the PMIC chip. Through Hole mounts IC management. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. 3 pins are present in total in this power management. It is recommended that Vsup should not be less than 1V for this IC power. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The recommended mounting type is Through Hole. The supervisors should be set to the following temperature: -40°C~125°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. There is a 12μA supply current present in the power management. To find similar IC managements from the manufacturer, you can always search by TS831.
TS831-3IZ-AP Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
12μA operating supply current
TS831-3IZ-AP Applications
There are a lot of STMicroelectronics TS831-3IZ-AP Voltage Supervisors applications.
- DC stabilized power supply module
- Set top box
- Important electronics for automotive protection
- Radio
- emergency room
- External alarm
- Sensitive sensors
- Precision measurement
- Efficient information transmission
- Digitally controlled LDO regulators circuit
