TS393IPT Overview
For convenience, it is packaged in 8-TSSOP (0.173, 4.40mm Width) .There is a CMOS, Open-Drain output type for this comparator.Electronic comparator is shipped by Tape & Reel (TR) .The comparator has a total of 8 terminals.The electrical component here belongs to the Comparator family.With a 3V voltage supply, the comparator can perform multiple demanding tasks.The type of the chip can be classified as General Purpose .Electronic comparator consists of 2 elements in total.Electronic comparator has 8 pins.The recommended mounting method is Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~125°C in order to prevent malfunctions.The comparator has a pin count of 8 .You can find more pin-to-pin solutions by searching TS393 .As a result, this comparator displays a quiescent current of 25μA .This component has a Surface Mount mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 20μA when using the device.A supply current exceeding 20μA may result in the comparator malfunctioning.There is sufficient power to run the device from 5V power supplies.You can input a maximum current of 1pA into this device.
TS393IPT Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 25μA
TS393IPT Applications
There are a lot of STMicroelectronics
TS393IPT linear comparators applications.
- Lithium ion battery monitoring
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
