TS393IDT Overview
To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .There is a comparator of type CMOS, Open-Drain output on this device.The chip is packaged with Cut Tape (CT) .The device is designed with 8 terminations.The chip belongs to Comparator .A comparator supplied with 3V voltage can complete many demanding tasks.Electronic comparator can be classified as a General Purpose chip.There are a total of 2 elements in it.The board includes 8 pins.Electronic comparator is recommended to mount using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~125°C .This comparator has 8 pins.In case you are looking for more pin-to-pin solutions, you may want to search TS393 .A quiescent current of 25μA is displayed by this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .Normal operation of the device requires 20μA supply current.If the current supply exceeds 20μA , the comparator might be damaged.This device requires 5V power supplies to operate.Input current to the device cannot exceed 1pA .
TS393IDT Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 25μA
TS393IDT Applications
There are a lot of STMicroelectronics
TS393IDT linear comparators applications.
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
- Battery-Powered Electronics
- General Purpose Low Voltage Applications
- Limit Comparators
