Name: TDE1897CDP
Brand: STMicroelectronics
SKU: TDE1897CDP
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Number of Pins	8
Operating Temperature	-25°C~85°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Peripheral Drivers
Technology	BCDMOS
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	NOT SPECIFIED
Number of Functions	1
Supply Voltage	24V
Terminal Pitch	2.54mm
[email protected] Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	TDE189
Pin Count	8
Number of Outputs	1
Qualification Status	Not Qualified
Output Type	N-Channel
Max Output Current	500mA
Operating Supply Voltage	35V
Interface	On/Off
Nominal Supply Current	20mA
Output Configuration	High Side
Output Current	500mA
Voltage - Supply (Vcc/Vdd)	Not Required
Max Supply Current	20mA
Input Type	Differential
Switch Type	General Purpose
Min Input Voltage	18V
Max Input Voltage	35V
Ratio - Input:Output	1:1
Voltage - Load	18V~35V
Driver Number of Bits	1
Fault Protection	Current Limiting (Fixed), Open Load Detect, Over Temperature, UVLO
Output Peak Current Limit-Nom	0.75A
Turn Off Time	20 μs
Built-in Protections	OVER CURRENT; THERMAL; UNDER VOLTAGE
Supply Voltage1-Min	9V
Width	7.62mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TDE1897CDP Product Details

TDE1897CDP Overview

Tube is the way it's packaged.The 8-DIP (0.300, 7.62mm) package includes it.A Through Hole mounting is used for the LED driving board.General Purpose is the switch type that it owns.To ensure reliable performance, the temperature should be set to -25°C~85°C TA.By default, it is set to output 1.A voltage of Not Required is used to power it.A maximum output voltage of N-Channel volts has been specified.As you can see, it comes from the TDE189 family.A total of 8 terminations have been found in it.During operation, the 8 pins are used.Currently, the lighting driver has a total of 1 functions.To meet the operation criteria, the maximum output current drops to 500mA.As long as the supply voltage is 24V, high efficiency can be achieved.The LED driving board is mounted in the way of Through Hole.The LED driver has a total of 8 pins.The output current is set to 500mA in this case.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.In order to achieve the best efficiency, the supply voltage should be set to 35V.Input voltage is limited to 35V volts.There is a minimum input voltage of 18V volts.For its operation, a maximum current requirement of 20mA is required.