TDA7496SA Overview
The package Clipwatt-15 (Vertical, Bent and Staggered Leads) contains it.Tube is the packaging method.15 terminations consist of terminating transmission lines with devices that match their characteristic impedance.Amp parts is configured wAmp partsh an output of 2-Channel (Stereo) .This electrical device has the type Class AB .In a computer or other communication device, there are 15 pins, which are pronged contacts.There is an electronic part mounted in the way of Through Hole .This electrical device is powered by 10V~32V volts.There are no channels on the device.When operating, Depop, Mute, Short-Circuit and Thermal Protection, Standby, Volume Control can be ensured.Amp parts is recommended that the operating temperature not exceed 0°C~70°C TA .In addition, it is equipped with 15 pins.Amp parts is a member of the family TDA7496 .Amp parts is mounted in the way of Through Hole .This electronic component's maximum output power is 5.5W kWh per hour.For normal operation, the supply voltage (Vsup) should be kept above 10V .Amp parts reaches 32V when the maximum supply voltage (Vsup) is reached.The power supply is 10/32V .Amp parts is noted that the maximal supply current is 50mA .
TDA7496SA Features
Clipwatt-15 (Vertical, Bent and Staggered Leads) package
15 pin count
TDA7496 family
5.5W kWh per hour
TDA7496SA Applications
There are a lot of STMicroelectronics
TDA7496SA audio amplifiers applications.
- Inverse/same-phase proportional circuit
- Addition and subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator and differentiator circuits
- Logarithmic and exponential operation circuits
- Multiplication and division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
