TDA7495S Overview
There is a device embedded in Multiwatt-15 (Vertical, Bent and Staggered Leads) .Amp parts is recommended that the chip be packaged in a Tube case.Amp parts is possible to terminate a transmission line wAmp partsh a device matching Amp partss characteristic impedance, referred to as a 15 termination.2-Channel (Stereo) is the output configured for it.The device is of type Class AB .The 15 pins are pronged contacts which are part of a signal interface in a computer or other communication device.Electronic parts are mounted in the way of Through Hole .Amp parts is powered by a voltage of 11V~35V volts.Operation can be ensured by Depop, Mute, Short-Circuit and Thermal Protection, Standby, Volume Control .A temperature greater than -20°C~85°C TA should not be used.There are 15 pins present on this device.This is a member of the TDA7495 family.The electronic part is mounted in the way of Through Hole .As a result of the limAmp partsations of this electronic part, Amp parts has a maximum output power of 11W kWh per hour.To ensure normal operation, the supply voltage (Vsup) must be maintained above 11V .The maximum supply voltage (Vsup) is reached at 35V .This electronic part has a Single supply type.The device is powered by a voltage of 11/35V volts.A maximum supply current of 100mA is achieved.
TDA7495S Features
Multiwatt-15 (Vertical, Bent and Staggered Leads) package
15 pin count
TDA7495 family
11W kWh per hour
TDA7495S Applications
There are a lot of STMicroelectronics
TDA7495S audio amplifiers applications.
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video and image computer boards
- Medical instruments
- Television broadcasting equipment
