TDA7495 Overview
In the Multiwatt-15 (Vertical, Bent and Staggered Leads) package, it is embedded.In this case, it is packaged as Tube .In addition, there are 15 terminations, which involve the termination of a transmission line with a device that matches the characteristic impedance of the line.In the configuration, 2-Channel (Stereo) is used as the output.This electrical device is classified as type Class AB .As part of a signal interface in a computer or other communication device, there are 15 pins, which are pronged contacts.In this case, the electronic part is mounted in the way of Through Hole .There is 11V~35V voltage supply to this electrical device.2 channels are available on the device.Operating with Depop, Mute, Short-Circuit and Thermal Protection, Standby, Volume Control is possible.Temperatures should not exceed -20°C~85°C TA .Amp parts belongs to the TDA7495 family.In this case, the electronic part is mounted in the way of Through Hole .According to the manufacturer, the maximum output power of this electronic component is 11W kWh per hour.A normal operation requires a supply voltage (Vsup) above 11V .In this case, the maximum supply voltage (Vsup) reaches 35V .Amp parts is a Single supply type.Supply currents are limited to 100mA .
TDA7495 Features
Multiwatt-15 (Vertical, Bent and Staggered Leads) package
TDA7495 family
11W kWh per hour
TDA7495 Applications
There are a lot of STMicroelectronics
TDA7495 audio amplifiers applications.
- single/dual op amp sum and difference circuits
- Integrator and differentiator circuits
- Logarithmic and exponential operation circuits
- Multiplication and division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
