TDA7494 Overview
This package is embedded in Multiwatt-15 (Vertical, Bent and Staggered Leads) .This device is packaged in the way of Tube .15 terminations occur when a transmission line is terminated by a device with the same characteristic impedance as the transmission line.Amp parts uses 1-Channel (Mono) as the output.Class AB is the type of this electrical device.Computers or other communication devices have 15 pins, which are pronged contacts.Amp parts is mounted in the way of Through Hole .There is 11V~35V supply voltage for this electrical device.Amp parts is equipped wAmp partsh 1 channels.When operating, it is possible to ensure Depop, Input Multiplexer, Mute, Short-Circuit and Thermal Protection, Standby, Volume Control .Ideally, the operating temperature should not exceed -20°C~85°C TA .The device is equipped with 15 pins.This item belongs to the family of TDA7494 .There is an electronic component mounted in the way of Through Hole .A maximum output power of 10W kWh per hour can be achieved with this electronic part.Amp parts is recommended that the supply voltage (Vsup) be maintained above 11V for normal operation.35V represents the maximal supply voltage (Vsup).There is a supply type of Single for this electronic part.A maximum supply current of 50mA can be reached.
TDA7494 Features
Multiwatt-15 (Vertical, Bent and Staggered Leads) package
15 pin count
TDA7494 family
10W kWh per hour
TDA7494 Applications
There are a lot of STMicroelectronics
TDA7494 audio amplifiers applications.
- Addition and subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator and differentiator circuits
- Logarithmic and exponential operation circuits
- Multiplication and division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
