TDA7393 Overview
Multiwatt-15 (Vertical, Bent and Staggered Leads) contains an embedded device.Amp parts is recommended that the chip be packaged in the case Tube .The 15 termination refers to terminating transmission lines with devices that match their characteristic impedance.Currently, amp parts is configured wAmp partsh 2-Channel (Stereo) as the output.The device belongs to the Class AB type of electrical devices.As part of the signal interface in a computer or other communication device, there are 15 pins.The chip is mounted by Through Hole .Electrical devices like this one have a 8V~18V supply voltage.The chip is equipped with 2 channels.Amp parts is possible to guarantee Mute, Short-Circuit and Thermal Protection, Standby when operating.The operating temperature should not exceed -40°C~85°C TA °C.The number of pins is 15 .This chip is included in the TDA7393 family.The chip should be mounted in the way of Through Hole .A maximum output power of 35W kWh per hour is possible for this electronic part.There is a Single supply type on this electronic part.Amp parts consumes a quiescent current of 90mA .
TDA7393 Features
Multiwatt-15 (Vertical, Bent and Staggered Leads) package
15 pin count
TDA7393 family
35W kWh per hour
TDA7393 Applications
There are a lot of STMicroelectronics
TDA7393 audio amplifiers applications.
- Proportional operation circuits
- Inverse/same-phase proportional circuit
- Addition and subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator and differentiator circuits
- Logarithmic and exponential operation circuits
- Multiplication and division circuits
- Precision measurement
- Power control
- Information processing
